Unfortunately yes. We cannot install it in the rain; The surface must be dry for us to be able to install your new exterior surface. However, there is no risk if it rains afterward, once the product has been installed.

To remove snow, as long as you use a plastic shovel and not a metal shovel, your new surface will not be damaged. Snowblowers are safe as long as they have Teflon cushions underneath. In terms of snow removal trucks, the company you hire should be aware that they have to use a shovel with a plastic shield. You can apply salt to the new rubber surface. On the other hand, we recommend using environmentally friendly salt.

No special cleaners are needed. We simply recommend using a garden hose or pressure washer for general maintenance of your new rubberized surface to keep it clean and looking great! To remove dirt or oil stains, we recommend using a mild cleaning product such as dishwashing detergent.

​ The rubber surfacing is an affordable alternative to concrete and asphalt. The cost varies depending on installation factors such as square footage, type of installation, as well as preparation and finishing required. Do not hesitate to submit an estimate request to obtain a budget price for your project. Remember to include the most accurate measurements possible and photos. You can also contact us for a representative visit to get a free estimate.

Yes, rubber paving is repairable.

We simply need to extract the damaged section and reapply the product to blend in with the existing surface.

The application of moisture-cured rubber. In general, it takes 24 hours to be able to walk on it, and at least 48 hours before you can drive on it.

Rubber paving surfaces can be applied directly to asphalt, concrete, cobblestones, or gravel.

Usually the installations will not take more than a day to complete.